Mass Flow Percent

This is a loss-less element specifying that the mass flow through the element should be a certain percentage of the sum of the mass flow through up to 10 other elements. This element may be handy if measurement data are available which have to be matched.

The following constants must be entered (to be specified in that order on the line beneath the *FLUID SECTION, TYPE=MASSFLOW PERCENT card):

• value in per cent
• first element
• second element (if appropriate)
• third element (if appropriate)
• fourth element (if appropriate)
• fifth element (if appropriate)
• sixth element (if appropriate)
• seventh element (if appropriate)
• eighth element (if appropriate)
• ninth element (if appropriate)
• tenth element (if appropriate)

Example files: .