00:12:19.874,00:12:22.874
Nicole Badour: What stresses are zero because of plane stress?

00:16:09.853,00:16:12.853
Tyler Bye: Is our exam going to be released so we can see how we answered the questions? 

00:19:18.306,00:19:21.306
Nicole Badour: Can you go over the FBD and change of variables?

00:20:19.919,00:20:22.919
David Lont: What's the actual solution to this magnet problem?

00:21:25.294,00:21:28.294
Leah Harris: If we turned in pictures of our work in elearning did you look at those as well?

00:21:48.615,00:21:51.615
Ethan Reid: Even if there are no solutions released, will our rubrics be posted so we can see what specific mistakes we made?

00:22:15.359,00:22:18.359
Benjamin Strong: Will there be short answer  question on the final

00:26:33.366,00:26:36.366
David Lont: Will you post HW8 soon?

00:27:02.566,00:27:05.566
Scott Miller: HW8 is already posted on Gradescope

00:27:05.622,00:27:08.622
Vegard Selnes: HW8 is already posted

00:37:20.942,00:37:23.942
Nicole Badour: Does the direction of q change as you go around the circle?

00:41:53.481,00:41:56.481
Ron McGee-Sinclair: So the less material there is the less shear flow you have? 

00:42:03.170,00:42:06.170
Nicole Badour: But even though the direction changes, since q is a magnitude we can take it out of the integral?

00:43:43.260,00:43:46.260
Ron McGee-Sinclair: Ah that makes sense. Thank you

00:55:19.616,00:55:22.616
Garrett Clyma: could you return to the previous slide after this for just a couple seconds

00:58:33.139,00:58:36.139
Scott Miller: Square

00:58:33.754,00:58:36.754
Nicholas Garrison: Circle

00:58:33.808,00:58:36.808
Steve Nemeth: circle

00:58:33.966,00:58:36.966
Garrett Clyma: Square?

00:58:36.118,00:58:39.118
Ethan Reid: square

00:58:48.379,00:58:51.379
Benjamin Strong: Circle

00:58:48.456,00:58:51.456
Jeremy Baiocchi: The one with less inner area

00:59:12.540,00:59:15.540
Ron McGee-Sinclair: circle because the Area is smaller

01:10:07.286,01:10:10.286
Scott Miller: Any rule of thumb for the thickness?

01:19:44.210,01:19:47.210
Nathan Thorn: Do we have a precise due date for the project yet? Haven't seen one on elearning.

01:20:20.054,01:20:23.054
Ethan Reid: Just go into AE 4630 and it should be there

01:20:35.176,01:20:38.176
Nicole Badour: If you click on the assignment like you are going to submit it, there is an attached PDF.

01:20:36.301,01:20:39.301
Ethan Reid: For me it's right at the top of the list of 4 assignments on there

01:20:51.686,01:20:54.686
David Lont: Found it, thanks